manualshive.com logo in svg

Cooper Bussmann 945U-E, Руководство пользователя, Страница: 96 / 109

Поделиться
Скачать
Cooper Bussmann 945U-E Скачать руководство пользователя страница 96

96

www.cooperbussmann.com/wirelessresources

Cooper Bussmann 945U-E Wireless Ethernet Modem & Device Server User Manual

Rev Version 2.14

Term

Definition

Dial-up

A communication connection via the standard telephone network, or plain old 
telephone service (POTS).

DNS

Domain name service (DNS) is a program that translates URLs to IP addresses by 
accessing a database maintained on a collection of Internet servers. The program 
works behind the scenes to facilitate surfing the Web with alpha versus numeric 
addresses. A DNS server converts a name like mywebsite.com to a series of 
numbers like 107.22.55.26. Every website has its own specific IP address on the 
Internet. 

DSL

Digital subscriber line (DSL) is a family of technology protocols for high-speed data, 
voice and video transmission over ordinary twisted-pair copper POTS (plain old 
telephone service) telephone wires. 

Encryption Key

An alphanumeric (letters and/or numbers) series that enables data to be encrypted 
and then decrypted so it can be safely shared among members of a network. WEP 
uses an encryption key that automatically encrypts outgoing wireless data. On the 
receiving side, the same encryption key enables the computer to automatically 
decrypt the information so it can be read. Encryption keys should be kept secret.

Firewall

A device or computer program that keeps unauthorized users out of a private 
network. Everything entering or leaving a system’s internal network passes 
through the firewall and must meet the system’s security standards in order to 
be transmitted. Often used to keep unauthorized people from using systems 
connected to the Internet.

Hub

A multiport device used to connect PCs to a network via Ethernet cabling or via 
802.11. Wired hubs can have numerous ports and can transmit data at speeds 
ranging from 10 Mbps to multi-Gigabyte speeds per second. A hub transmits 
packets it receives to all the connected ports. A small wired hub may only connect 
four computers; a large hub can connect 48 or more. 

Hz

Hertz. The international unit for measuring frequency, equivalent to the older unit 
of cycles per second. One megahertz (MHz) is one million hertz. One gigahertz 
(GHz) is one billion hertz. The standard US electrical power frequency is 60 Hz, 
the AM broadcast radio frequency band is 535–1605 kHz, the FM broadcast radio 
frequency band is 88–108 MHz, and wireless 802.11b/g LANs operate at 2.4 GHz.

IEEE

Institute of Electrical and Electronics Engineers, New York, www.ieee.org. A 
membership organization that includes engineers, scientists and students in 
electronics and allied fields. It has more than 300,000 members and is involved 
with setting standards for computers and communications.

Infrastructure Mode

An 802.11 setting providing connectivity to an access point. As compared to 
ad-hoc mode, whereby 802.11 devices communicate directly with each other, 
clients set in Infrastructure Mode all pass data through a central access point. 
The access point not only mediates wireless network traffic in the immediate 
neighborhood, but also provides communication with the wired network. 

I/O

Input/Output. The term used to describe any operation, program, or device that 
transfers data to or from a computer.

Internet Appliance

A computer that is intended primarily for Internet access, is simple to set up, and 
usually does not support installation of third-party software. These computers 
generally offer customized web browsing, touch-screen navigation, e-mail services, 
entertainment, and personal information management applications. 

IP

Internet Protocol (IP) is a set of rules used to send and receive messages across 
local networks and the Internet.

IP Telephony

Technology that supports voice, data and video transmission via IP-based LANs, 
WANs, and the Internet. This includes VoIP (Voice over IP).

IP Address

A 32-bit number that identifies each sender or receiver of information that is 
sent across the Internet. An IP address has two parts: an identifier of a particular 
network on the Internet and an identifier of the particular device (which can be a 
server or a workstation) within that network.

Содержание 945U-E














































































































Отзывы:

Нет отзывов