manualshive.com logo in svg

Cooper Bussmann 945U-E, Руководство пользователя, Страница: 43 / 109

Поделиться
Скачать
Cooper Bussmann 945U-E Скачать руководство пользователя страница 43

www.cooperbussmann.com/wirelessresources

Cooper Bussmann 945U-E Wireless Ethernet Modem & Device Server User Manual

43

Rev Version 2.14

Remote Device Port

Client only. Enter the TCP port number of the remote server (the remote port to 
automatically connect to).

Remote Device IP 
Address

Client only. Enter the IP address of the remote server.

Serial Gateway Mode

Multicast—Allows point-to-multi-point serial transfer. All members of the group will 
receive serial transmissions made by any other member of the multicast group.

Character Timeout

Enter the maximum delay (in msec) between received serial characters before packet 
is sent via network.

Packet Size

The number of received bytes that will be buffered before a packet is sent via the 
network.

Multicast Group Port

Enter the UDP port number that all members of the group will use. All group 
members should use the same port number.

Multicast Group IP 
Address

Enter a valid multicast IP address identifying the group (all group members should 
use the same multicast group IP address). Valid multicast IP addresses are in the 
range 224.0.1.0 to 238.255.255.255.

Serial Gateway Mode

Modbus—Allows a serial Modbus client (master) to connect with a single Ethernet 
Modbus TCP server (slave).

Character Timeout

Enter the maximum delay (in msec) between received serial characters before packet 
is sent via network.

Packet Size

The number of received bytes that will be buffered before a packet is sent via the 
network.

Modbus Server Port

Enter the TCP port number of the remote server (the remote port to automatically 
connect to).

Modbus Server IP 
Address

Enter the IP address of the remote server (the remote IP address to automatically 
connect to).

RS-232 / RS485 Modbus TCP/RTU Converter

Modbus Server TCP 
Port

Port number used for the Modbus TCP. Standard port is 502.

Pauses Between 
Requests

Enter the delay between serial request retries, in milliseconds.

Response Timeout

Enter the serial response timeout, in milliseconds. A serial retry will be sent if a 
response is not received within this timeout period.

Connection Timeout

Enter the TCP connection timeout, in seconds. If no Modbus/TCP data is received 
within this timeout period, the TCP connection will be dropped. Set this field to zero 
for no timeout.

Maximum Request 
Retries

Enter the maximum number of request retries performed serially.

Maximum 
Connections

Enter the maximum number of simultaneous TCP connections to the server allowed.

Содержание 945U-E














































































































Отзывы:

Нет отзывов