
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 945U-E Wireless Ethernet Modem & Device Server User Manual
3
Rev Version 2.14
Safety
Exposure to RF energy is an important safety consideration. The FCC has adopted a safety standard for human
exposure to radio frequency electromagnetic energy emitted by FCC regulated equipment as a result of its actions
in Docket 93-62 and OET Bulletin 65 Edition 97-01.
UL Notice
1. The Wireless Ethernet module is to be installed by trained personnel / licensed electricians only and installation
must be carried out in accordance with the instructions listed in the Installation Guide and applicable local
regulatory codes.
2. The units are intended for Restricted Access Locations.
3. The Wireless Ethernet module is intended to be installed in a final enclosure, rated IP54, before use outdoors.
4. The Equipment shall be powered using an external Listed Power Supply with LPS outputs or a Class 2 Power
Supply.
5. The Wireless Ethernet module must be properly grounded for surge protection before use.
6. If installed in a hazardous environment coaxial cable shall be installed in a metallic conduit.
GNU Free Documentation License
Copyright (C) 2009 ELPRO Technologies.
ELPRO Technologies is using a part of Free Software code under the GNU General Public License in operating
the 945U-E product. This General Public License applies to most of the Free Software Foundation’s code and
to any other program whose authors commit by using it. The Free Software is copyrighted by Free Software
Foundation, Inc., and the program is licensed “As is” without warranty of any kind. Users are free to contact ELPRO
Technologies for instructions on how to obtain the source code used in the 945U-E.
A copy of the license is included in “Appendix E - GNU FREE DOC LICENSE.”
Important Notice:
ELPRO products are designed to be used in industrial environments by experienced industrial engineering
personnel with adequate knowledge of safety design considerations.
ELPRO radio products are used on unprotected license-free radio bands with radio noise and interference. The
products are designed to operate in the presence of noise and interference. However, in an extreme cases radio
noise and interference could cause product operation delays or operation failure. As with all industrial electronic
products, ELPRO products can fail in a variety of modes due to misuse, age, or malfunction. We recommend that
users and designers design systems using design techniques intended to prevent personal injury or damage during
product operation, and provide failure tolerant systems to prevent personal injury or damage in the event of product
failure. Designers must warn users of the equipment or systems if adequate protection against failure has not been
included in the system design. Designers must include this Important Notice in operating procedures and system
manuals.
These products should not be used in non-industrial applications or life-support systems without first consulting
ELPRO.
1. A radio license is not required in some countries, provided the module is installed using the aerial and
equipment configuration described in the
945U-E Installation Guide. Check with your local distributor for
further information on regulations.
2. Operation is authorized by the radio frequency regulatory authority in your country on a non-protection basis.
Although all care is taken in the design of these units, there is no responsibility taken for sources of external
interference. Systems should be designed to be tolerant of these operational delays.
3. To avoid the risk of electrocution, the aerial, aerial cable, serial cables and all terminals of the 945U-E module
should be electrically protected. To provide maximum surge and lightning protection, the module should be