1
way cassette type indoor units
Louver unified setting:
when the controller is ON,
press "Louver", the icon of
up&down air supply fla
s
hes.
During flashing, press
to adjust the location of
louver.
The icon stops flashing after
5s, and the louver is at the
set location
2
3
(1)
(2)
(1)
(2)
Louver setting when connected with K3 4-way or K3 2-
Louver separate setting:
When the controller is ON, hold "Louver"
for over 3s to enter louver separate setting
mode. And the display of screen is as Fig.
(1), indicating that No.1 louver is in setting
state. Then press "Louver" again, the
display on screen is as Fig. (2), indicating
that No.2 louver is in setting state. (No.1~4
louvers available).
The display returns to common interface
when there is no operation within 5s.
Louver separate setting:
When the controller is ON, hold "Louver" for
over 3s. And the display of screen is as Fig.
(1), indicating the louver is in separate
setting state, and “01” means the first
louver to be set separately. Then press
"Louver" to select target louver, and adjust
louver by pressing . The display
returns to Fig (2) When there is no
operation within 5s.
Hold "Fan+Health" for over 3s to switch to "4F" to control the
louver.
8
