●
When heat mode stops, sometimes air-supply
operation will last for 2 minutes automatically.
Cool
Dry
Heat
Fan
Auto
The icons on screen will switch in the following
sequence at each press of Mode button
Point signal transmitter
on the controller to the
signal receiver, and press
Each press of
will increase the
temperature by 1°
F
；
will decrease the
temperature by 1°
F
；
Each press of
Temperature and Humidity
●
ON/OFF operation should be performed at an interval
of min.3s, otherwise it may lead to a failure to actuate.
Mode
●
When there are three levels of Dry operation, hold
"Mode+Fan" for over 3s when controller is OFF to
switch to "dC" unit type.
●
When Auto-dry function is available, hold "Mode+Fan" for
over 3s when controller is OFF to switch to "AC" unit type.
ON/OFF
Point signal transmitter of the controller to
the signal receiver and press
,
the signal
receiver will beep once to indicate a
successful reception
.
Mode
Button
Temperature
.
4
