Page 4
Accessories
1
The air conditioning system comes with the following accessories. Use all of the installation parts and
accessories to install the air conditioner. Improper installation may result in water leakage, electrical
shock, or fire, or cause the equipment to fail.
Name
Shape
Quantity
Installation plate
1
Plastic expansion sheath
5-8
Self-tapping screw AST3.9X25
5-8
Connecting
pipe
assembly
Liquid side
Gas side
1
Drain joint (some models)
1
Seal ring (some models)
Ø 9.52
Ø 6.35
Parts you must purchase
(consult your technician
for the proper size)
Ø 12.7
Ø 9.52
Ø 15.9
1
1
User’s manual
Installation manual
Optional part
(one piece per indoor unit)
Optional part
(1-5 pieces per outdoor unit,
depending on the model)
Transfer connector (packed with the indoor unit
or outdoor unit, depending on the model)
(NOTE: Pipe sizes differ from appliance to appliance.
To meet different pipe size requirements, sometimes a
transfer connector must be installed on the outdoor
unit.)
Optional part
(One piece per cable)
Magnetic ring
(After installation, hitch this on the connective cable
between the indoor and outdoor units.)
1
Cord protection rubber ring
(If the cord clamp cannot fasten the cord
because the cord is too small, wrap the cord
protection rubber ring (supplied with the
accessories) around the cord. Then fix it with
the cord clamp.)
(depending on the models)
(depending on the models)
(on some models)
Optional Accessories
There are two types of remote controls: wired and wireless.
Select a remote control according to the customer's request and install it in an appropriate place.
To select a suitable remote control, refer to catalogues and technical literature.
