Cooper & Hunter CHV-5S224SNMX, Руководство по обслуживанию

Страница: 33 / 125

0 31 00 CONTROL
CHV
5 COM PACT MULTI VRF UNIT
SERVICE M ANUAL
continuously press ―
∨
‖button twice to decrease temperature to 12°C (when Save function is activated, the
temperature in Dry mode can’t be adjusted to 12°C and the setting range is ―lowest temperature in Save mode‖ ~
30°C).
Note:
①
Under Auto mode or Out function is activated, the setting temperature can not be adjusted by pressing
―
∧
‖
or
―
∨
‖
②
When the wired controller is connected with a Fresh Air Indoor Unit, setting temperature won’t be
displayed and can’t be adjusted via ―
∧
‖
or
―
∨
‖button. The air outlet temperature in cooling or heating can only be
set in the parameter setting status.
4
）
Fan Speed Setting
Under On status, pressing FAN button can set fan speed circularly as:
Note: Under the DRY mode, the fan will be kept running at the low speed and the fan speed isn't adjustable
5
）
Timer setting
The wired controller is equipped with two kinds of timer: general timer and clock timer. General timer is
factory defaulted setting. Please refer to parameter setting
a. General Timer
Unit On/Off after a desired hour can be set through general timer.
Set Timer: when timer is not set, press TIMER button to enter timer setting and ―HOUR‖ icon is blinking. Press
― ∧ ‖or― ∨ ‖ button to adjust timer time. Press TIMER button to save the setting and then exit setting.
Cancel Timer : when timer is set, press TIMER button to cancel it.
Timer setting range: 0.5~24h. Pressing ―
∧
‖or―
∨
‖ button increases or decreases timer time by 0.5h; holding
―
∧
‖or―
∨
‖ button increases or decreases timer time by 0.5h every 0.3s.
In unit On status, timer Off setting is shown as follow: