Cooper & Hunter Arctic NG Wi-Fi Series страница 23 Скачать руководство пользователя

Страница: 23 / 111

Child lock function

Press "▲" and "▼" simultaneously to turn on or

turn off child lock function. When child lock func

tion is on, " " icon is displayed on remote control

ler. If you operate the remote controller, the " "

icon will blink three times without sending signal to

the unit.

Under OFF status, press "▼" and "MODE" buttons

simultaneously to switch temperature display

between °C and °F.

Temperature display switchover function

Interface of dry contact device is provided, while

the dry contact device shall be prepared and in-

stalled by the customer.

Dry Contact function

Press uninterruptedly

"LIGHT"

button 6 times in 5

seconds thus we enter the

Multi Timer

mode as well

as three-minute-counting-down stars. If three couples

of times commands are valid and well-received in

3 minutes, the

Multi Timer

will be activated along

with the success sound of four buzzing, and the for-

mer

Multi Timer

settings with be replaced. If not,

then

Multi Timer

mode exits along with the failure

sound of six buzzing, and the former

Multi Timer

settings still remain effective.

Multi timer function

●

THREE TIMERS

Outdoor temperature display is not available for some
models. At that time, indoor unit receives " " sign-
al, while it displays indoor set temperature.
It's defaulted to display set temperature when turning
on the unit. There is no display in the remote control

ler.
Only for the models whose indoor unit has dual-8 dis-
play.
When selecting displaying of indoor or outdoor ambi

ent temperature, indoor temperature indicator dis-
plays corresponding temperature and automatically
turn to display set temperature after three or five se-
conds.

●

NOTE

Under heat mode, press "TEMP" and "CLOCK" but-

tons simultaneously to start up or turn off 8°C heat-

ing function. When this function is started up, " "

and "8°C" will be shown on remote controller, and

the air conditioner keep the heating status at 8°C.

Press "TEMP" and "CLOCK" buttons simultane

ously again to exit 8°C heating function.

Under energy-saving function, fan speed is defaulted
at auto speed and it can't be adjusted.
Under energy-saving function, set temperature can't
be adjusted. Press "TURBO" button and the remote
controller won't send signal.
Sleep function and energy-saving function can't oper

ate at the same time. If energy-saving function has
been set under cool mode, press sleep button will
cancel energy-saving function. If sleep function has
been set under cool mode, start up the energy-saving
function will cancel sleep function.

●

Under cooling mode, press "TEMP" and "CLOCK"

buttons simultaneously to start up or turn off ener

gy-saving function. When energy-saving function

is started up, "SE" will be shown on remote con

troller, and air conditioner will adjust the set tem

perature automatically according to ex-factory

setting to reach to the best energy-saving effect.

Press "TEMP" and "CLOCK" buttons simultane

ously again to exit energy-saving function.

Energy-saving function

NOTE

Function introduction for

combination buttons

8°C heating function

Under 8°C heating function, fan speed is defaulted at
auto speed and it can't be adjusted.
Under 8°C heating function, set temperature can't be ad-
justed. Press "TURBO" button and the remote con-
troller won't send signal.
Sleep function and 8°C heating function can't operate
at the same time. If 8°C heating function has been set
under heat mode, press sleep button will cancel 8°C
heating function. If sleep function has been set under
heat mode, start up the 8°C heating function will cancel
sleep function.
Under °F temperature display, the remote controller will
display 46°F heating.

●

NOTE

Memory function does not cover the

Multi Timer

The time calibration of remote controller is not effec

tive after setting

Multi Timer

function is prioritized over the original

TIMER ON" and

TIMER OFF

function.

Multi Timer

function will not be useful any remote

controller which does not have LIGHT button.

Multi Timer

function can be set only in unit off

status.
This function is only available for some models.

1.
2.

●

NOTE

Press uninterruptedly

"LIGHT"

button 4 times in 5

seconds thus we enter the

Multi Timer

mode as well

as two-minute-counting-down stars. If two couples

of times commands are valid and well-received in

2 minutes, the

Multi Timer

will be activated along

with the success sound of four buzzing, and the for-

mer

Multi Timer

settings with be replaced. If not,

then

Multi Timer

mode exits along with the failure

sound of six buzzing, and the former

Multi Timer

settings still remain effective.

●

TWO TIMERS

Press uninterruptedly

"LIGHT"

button 8 times in 5

seconds all the

Multi Timer

settings will be erased.

●

TIMER CANCELLATION

When the three-minute-counting-down in

THREE TIMERS, or the two-minute-counting-down

in TWO TIMERS is due.

TIMER commands are not on-off coupled.

TIMER spans overlap each other.

TIMER span is shorter than 4 minutes.

●

INVADLID OPERATION

After successfully entering the

Multi Timer

mode, one buzzing will be heard to prompt that

now you can use the

TIMER ON

and

TIMER

OFF"

buttons to do the TIMER 1.

After successful setting of TIMER 1, two buzzing

will be heard to prompt that now you can use the

TIMER ON" and

TIMER OFF

buttons to do

the TIMER 2.

After successful setting of TIMER 2, three buzz

ing will be heard to prompt that now you can use

the

TIMER ON" and

TIMER OFF

buttons to

do the TIMER 3.

After successful setting of TIMER 3 in THREE

TIMERS, or after successful setting of TIMER 2

in TWO TIMERS, four buzzing will be heard to

congratulate you that

Multi Timer

is done.

If there are any invalid operations, or cancella

tion commands, six buzzing will be heard.

●

INTERACTIVE BUZZING

Under unit off status, hold "Mode" and "Fan"

buttons simultaneously for 5s to turn on or turn off

the auto clean function. When the auto clean func

tion is turned on, indoor unit displays "CL" . During

the auto clean process of evaporator, the unit will

perform fast cooling or fast heating. There may be

some noise, which is the sound of flowing liquid or

thermal expansion or cold shrinkage. The air con

ditioner may blow cool or warm air, which is a

normal phenomenon. During cleaning process,

please make sure the room is well ventilated to

avoid affecting the comfort.

Double Self Clean function

The auto clean function can only work under normal
ambient temperature. If the room is dusty, clean it
once a month; if not, clean it once every three
months. After the auto clean function is turned on,
you can leave the room. When auto clean is finished,
the air conditioner will enter standby status.
This function is only available for some models.

●

NOTE