Cooper & Hunter Arctic NG Wi-Fi Series, Руководство пользователя

Страница: 20 / 111

20
button
function is set. Do not put the remote controller
near the object of high temperature or low tem -
perature in order to avoid detecting inaccurate
ambient temperature. When I FEEL function is
turned on, the remote controller should be put
within the area where indoor unit can receive the
signal sent by the remote controller.
Press this button to start I FEEL function and " "
will be displayed on the remote controller. After
this function is set, the remote controller will send
the detected ambient temperature to the controller
and the unit will automatically adjust the indoor
temperature according to the detected tempera
-
ture. Press this button again to close I FEEL func
-
tion and " " will disappear.
Please put the remote controller near user when this
Sleep 3 the sleep curve setting under Sleep mode
by DIY;
(1) Under Sleep 3 mode, press " Turbo " button for a
long time, remote controller enters into user indivi-
duation sleep setting status, at this time, the time
of remote controller will display " 1hour " , the set-
ting temperature " 88 " will display the correspond -
ing temperature of last setting sleep curve and blink
(The first entering will display according to the initial
curve setting value of original factory);
(2) Adjust "▲" and "▼" button, could change the
corresponding setting temperature, after adjusted,
press " Turbo " button for confirmation;
(3) At this time, 1hour will be automatically increas-
ed at the timer position on the remote control, (that
are "2hours" or "3hours" or "8hours"), the place of
setting temperature "88" will display the corres-
ponding temperature of last setting sleep curve
and blink;
(4) Repeat the above step (2)~(3) operation, until
8 hours temperature setting finished, sleep,curve
setting finished, at this time, the remote controller
will resume the original timer display; temperature
display will resume to original setting temperature.
Sleep 3 the sleep curve setting under Sleep mode
by DIY could be inquired:
The user could accord to sleep curve setting method
to inquire the presetting sleep curve, enter into user
individuation sleep setting status, but do not ch-
ange the temperature, press "Turbo" button direct-
ly for confirmation. Note: In the above presetting
or enquiry procedure, if continuously within 10s,
there is no button pressed, the sleep curve setting
within 10s, there is no button pressed, the sleep
curve setting status will be automatically quit and
resume to display the original displaying. In the
presetting or enquiry procedure, press " " button,
"Mode" button, "Timer" button or "Sleep" button,
the sleep curve setting or enquiry status will quit
similarly.
●
●
●
●
TIMER ON button
"TIMER ON" button can set the time for timer
on. After pressing this button, " " icon disap -
pears and the word "ON" on remote controller
blinks. Press "▲" or "▼" button to adjust TIMER
ON setting. After each pressing "▲" or "▼"
button. TIMER ON setting will increase or
decrease 1min. Holding "▲" or "▼" button, 2s
later, the time will change quickly until reaching
your required time.
Press "TIMER ON" to confirm it. The word "ON"
will stop blinking. " " icon resumes displaying.
Cancel TIMER ON: Under the condition that
TIMER ON is started up, press "TIMER ON"
button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer
off. After pressing this button, " "icon disap -
pears and the word "OFF" on remote controller
blinks. Press "▲" or "▼" button to adjust TIMER
OFF setting. After each pressing "▲" or "▼"
button, TIMER OFF setting will increase or
decrease 1min. Holding "▲" or "▼" button, 2s
later, the time will change quickly until reaching
your required time.
Press "TIMER OFF" and the word "OFF" will
stop blinking. " " icon resumes displaying.
Under the condition that TIMER OFF is started
up, press "TIMER OFF" button to cancel it.
button /
●
●
●
NOTE
Under on and off status, you can set TIMER OFF or
TIMER ON simultaneously.
Before setting TIMER ON or TIMER OFF, please
adjust the clock time.
When turning on TIMER ON or TIMER OFF function,
set this function valid all the time and the air condi
-
tioner will be turned on or turned off at set tempera
-
ture every day. " " button has no affect to setting. If
this function is not required, use the remote controller
to cancel it.