Coolpak PCA050, Руководство по эксплуатации

Страница: 8 / 43

Page | 8
1-4 Available Options
PCA Series Chillers are available with options that tailor the unit to your requirements.
Some are factory installed, some can be retrofitted in the field.
Some of these options are:
Special Pumps
Special pump options are available for greater pressure and flow rates. Bronze and stainless
steel wetted surface standard flow pumps ranging from 2.07 Bar to 4.14 Bar are available.
Reservoirs
PCA Series Chillers are available without a reservoir for processes that use their own
reservoir.
Power Cord
A 3 meter power cord is available to speed PCA installation.
Casters
Four 50mm swivel casters add mobility to the PCA unit.
CPR Valve
A crankcase pressure regulating (CPR) valve is available for leaving water temperatures up to
24°C.
1-5 Un-crating Your New Chiller
PCA Series Chillers are shipped mounted on a skid, enclosed in a plastic wrapper, and open
crated on all four sides and top.

Pry the crating away from the skid and remove. Use a pry bar to remove the blocks
securing the unit to the skid.

Lift the unit off the skid with a fork truck. Insert forks between skid and chiller from the
side until they protrude beyond the opposite side of the unit. The forks must be
equidistant from the centre line of the unit and the unit must be balanced on the forks.

Lift slowly and only high enough to clear the skid. Use a pry bar if necessary to
remove the skid from the unit.

Lower slowly. The unit will land on its feet or casters and can be moved into position.