COOLIUS Y50A Скачать руководство пользователя страница 5

Страница: 5 / 47

COOLIUS Y50A

1 Important notes on the operating instructions

COOLIUS Y50A (the machine) has been designed and built to ensure long lasting, high-level operating relia

bility with maximum safety for user.

This operating manual is part of the machine.
Read carefully before use.

• The user is responsible for the proper use of the machine in accordance with the instructions found in

this operating manual.

• The manufacturer cannot be held responsible for damage to persons, animals and/or objects due to

improper use different to that illustrated in this instruction manual.

• The manufacturer reserves the right to make technical and aesthetic alterations to the machine without

prior notification.

The purpose of this operating manual is:

• To supply the user with all the information needed to use the unit starting from purchase on through to

the disposal of this same machine.

• To ensure maximum support for the personnel assigned to the use and the maintenance of the ma-

chine.

For any special information or requests for technical assistance or spare parts, please contact the Service

partner of your country.

Disclaimer

This manual was created with great care. However, if you notice any omissions or inaccuracies,

please inform the service partner of your country in writing.
The manufacturer shall not be liable for technical or typographical errors and reserves the right at

any time without prior notice to the product and the instruction manuals make.

The illustrations in this document may differ from the machine actually supplied with this manual.

Содержание Y50A















































Результаты поиска

Содержание Y50A

Отзывы:

COOLIUS Y50A, Руководство по эксплуатации, Страница: 5 / 47

Результаты поиска

Содержание Y50A

Отзывы: