COOLIUS Y50A Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 47

COOLIUS Y50A Скачать руководство пользователя страница 2

2

COOLIUS Y50A

Introduction

Dear Customer,
Thank you for purchasing this product.
To ensure this condition and ensure safe operation, you must observe these operating instructions!

Read the entire operating instructions before using the machine for the first time. Observe all operating

instructions and safety instructions!

All company names and product names are trademarks of their respective owners. All rights reserved.
If you have any questions, please contact the respective service partner of your country

See chapter 9 Con-

tact and support p. 46.

This machine meets the requirements of valid EU directives.
2014/68/EU (PED)
2006/42/EU
2014/30/EU
2014/35/EU
The declaration of conformity can be obtained from:

www.coolius-ac.com

WOW! Würth Online World GmbH
Via della Punta 6/2
48018 Faenza (RA)
Italy

Reprinting, even in extract, is allowed only after obtaining approval.
We reserve the right to make changes to the product at any time, if we consider them to be in the interest

of quality improvement, without prior notice or notification. Figures may be examples, which may differ in

appearance from the goods delivered.Wealsoreservetherighttoerrors,andcannotbe held responsible for typo-

graphical mistakes. Our general terms and conditions apply.

«
1
2
3
4
...
»

Содержание Y50A
















































Отзывы:

Нет отзывов