10
STEP 9
Drill holes for screws (Fig 9).
STEP 10
Screw bottom bracket into the wall/floor. Ensure bottom
wire guide bracket anchor points up (Fig 8).
NOTE: Use masonry plugs if installing directly into
concrete/brick wall. Do not install directly into mortar
between bricks.
STEP 11
Screw cap down until wire becomes taut.
STEP 12
Repeat process for other side bottom wire guide bracket.
STEP 13
Wire guide installation is now complete, and your roller
blind should move freely up and down the wire guide
system, with the use of the crank operating wand (Fig
10).
Fig 9
Fig 10
