8
• Setting the Display Language
Under this setting, you can select the language you prefer for the LCD screen. You may change the
language setting in any camera mode.
1. Turn on the camera.
2. Press Menu button and use Right button to select “
SETUP MENU
”.
Press to select item.
• Setting the Current Date and Time
1. Turn the camera on.
2. Press Menu button and use Right button to select “
SETUP MENU
””.
Press to select item.
Use Up/Down button to change the display of date as:
A. YY/MM/DD
B. MM/DD/YY
C. DD/MM/YY
3 Taking Pictures
Before you take pictures, please read this note first:
NOTE:
Never remove batteries, disconnect the AC adaptor from the camera, or unplug the adaptor while a picture is being
saved. Doing so will prevent the current picture being saved and may corrupt other pictures already stored on the
camera’s internal memory or on a memory card.
NOTE:
When taking outdoor pictures, avoid intense sunlight that may cause sun spots in pictures. And always make sure that
the sun or other light source is in front of the subject.
• Taking a Picture
1. Set the Mode selector to Auto or Manual mode.
2. Turn on the camera.
3. Frame your subject using the LCD screen.
4. Press the Shutter button completely down to take a picture. Hold the camera
steady. A beep will sound when the picture has been taken.
�
�
Shutter button
NOTE:
• In Manual mode,
while capturing a picture, you can press the Shutter button halfway down to check whether there is proper
exposure value subject to your current light condition for capturing.
• When the
camera has automatically completed the setting of exposure and white balance, the icons on the LCD screen will turn
green.
• When
the camera’s auto exposure and auto white balance function is not ready or your capturing condition is over the camera’s
setting
,
the icons on LCD screen will turn red.
•
Under the above condition, if you still take the picture, the picture taken is in risk of over exposure or too dark.
