Manual ISW06x 14161_A USINTL
10
In the event of a possible malfunction, your CookTek soup well will display an
error code on the alphanumeric display. Units will beep a specific number of times,
indicated by the error and flash the lights on the control box. Please consult the
following table when encountering an error code. To reset error conditions, remove
the pan from the unit and press the Power button, or unplug the unit.
Error Error Cause
Displayed Message Troubleshooting
1
Broken temperature
sensor.
E-01
Service required.
2
Broken temperature
sensor. Pan temperature
is too high.
E-02
Remove any pans from
the dry well surface and
let cool. Turn unit off
and on to reset error.
If problem persists,
contact service provider.
3
Over current (peak).
E-03
Try different cookware.
Service may be
required.
7
Hardware failure.
E-07
Service required.
8
Zero cross error.
E-08
Turn unit off, then on.
Plug unit into outlet on
different circuit breaker.
If problem persists,
service is required on
device.
13
User interface error.
E-13
Check control panel
connection, cycle power.
Service required.
16
Critical error.
E-16
Call dealer for service.
Service required.
ERROR CODES
