11
8
Manual PTDS 10336_A USINTL
including (but not limited to) LABOR, MATERIALS AND TRAVEL FOR
CAULKING IN DROP-IN (“BUILT-IN”) UNITS, OR REPAIRS / REPLACEMENT
OF FUSES, BREAKERS, MILLWORK AND / OR COUNTER-TOPS).
This warranty is void if it is determined that upon inspection by CookTek or one its
Authorized International Distributor s that the equipment has been modified,
misused, misapplied, improperly installed, or damaged in transit or by fire, flood or
act of God. Broken Glass-Ceramic tops are considered abuse and are NOT
covered. Warranty will be considered void if the serial nameplate has been
removed or defaced or if the unit has been opened or modified in any way or
service has been attempted by unauthorized personnel.
The prices charged by CookTek for its products are based upon the limitations in
this warranty. Seller’s obligation under this warranty is limited to the repair of
covered defects without charge by CookTek or one of its Authorized International
Distributors
This warranty is valid in the continental United States of America (USA) and
Canada only. It is valid only if purchased through an authorized Cooktek
Representative or Dealer. To receive Warranty Service in the USA, please call
CookTek’s Customer Service Department at 1 (888) 266-5835, or (312) 563-9600.
A Returns Authorization (RA) number will be issued along with instructions for
returning goods for service (or their replacement). The RA number must be written
clearly or printed on the outside of the return shipping container, or on the address
label when returning units for service. Units received without an RA number will be
refused at our shipping dock and may encounter a delay in service. Units must be
taken or shipped to the factory with transportation charges prepaid for service.
CookTek will provide return freight. If instead, the unit(s) is handled under
CookTek’s Advanced Replacement Program (ARP), CookTek will pay for shipping
both ways, but the unit(s) being replaced must be returned. Instructions and
alternate courses of action will be provided by Customer Service. Please save all
packaging materials for possible use in shipping. CookTek assumes no liabilities
whatsoever for any damages incurred in transit. PLEASE BE SURE TO USE
ADEQUATE PACKAGING AND A RELIABLE SHIPPING METHOD OR, IF USING
THE ARP PROGRAM, USE THE SAME BOX THE REPLACEMENT UNIT
ARRIVED IN FOR THE RETURN.
OUTSIDE THE USA AND CANADA
CookTek offers NO warranty outside of the USA and Canada.
Warranty is
offered and performed at the discretion of CookTek’s local Authorized International
Distributor. Contact details can be found at www.cooktek.com/find-rep, or by calling
+1 (312) 563-9600.
For additional information and other details concerning warranty, please contact our
Customer Service Department at:
CookTek Induction Systems, LLC • www.cooktek.com
In the USA, Tel: 1 (888) COOKTEK, 1 (888) 266-5835 • Fax: 1 (888) 266-5329
Outside the USA, Tel: +1 (312) 563-9600 • Fax: +1 (312) 432-6220
Dimensions PTDS
inches
mm
A
16.25
412
B
20.19
512
C
15.50
393
D
21.63
549
E
8.55
217
F
4.55
115
G
1.00
25
Dimensions XLPTDS
inches
mm
A
16.00
406
B
21.25
539
C
15.50
393
D
21.75
552
E
8.55
217
F
4.55
115
G
1.00
25
PTDS (16”) Charger
XLPTDS (18”) Charger
