9
10
Manual PTDS 10336_A USINTL
These notes are designed to assure trouble free operation of your CookTek PTDS.
Bag Assembly Procedure
The CookTek bag comes with a polycarbonate Pellet Centering Tray (PCT) already
installed in a large, Velcro sealed pouch. Please check PCT to make sure that the
label is readable and oriented toward the opening of the PCT pouch. This assures
proper orientation. There is a second, smaller Velcro sealed pouch sewn on the
OUTSIDE of the larger PCT pouch. This smaller pouch holds the CookTek black
plastic pellet. The CookTek pellet fits firmly into this smaller pouch.
It is very important not to put the CookTek pellet into the same pouch holding the
Pellet Centering Tray.
Rememeber - the pellet and the PCT go into separate
pockets.
Preventative Maintenance
The CookTek PTDS units have cooling vents located on the bottom and back of the
unit. It is very important to keep these vents open and free from accumlated dust
or dirt. It is highly recommended that you add the cleaning of these vents to your
standard maintenance list. Unplug the unit, carefully turn the unit on its side, and
wipe off any accumulated dust and dirt.
Regular System and Bag Checks - Points to Remember
●
Periodically check to make sure all Velcro seams and pockets are clean and
properly closed.
●
Make sure that the PCT and pellets are present and are located in their
respective and SEPARATE pouches.
●
Check for foreign objects in the bag or in the PCT and pellet pouches. These
objects should be removed immediately.
●
When charging bags, make sure that the bag is properly positioned and that the
end flap is properly closed.
●
Use only CookTek approved bags and pellets.
Other systems are NOT
COMPATIBLE.
● Do not
use bags that appear ripped or damaged in any way.
● Do not
wash bags with the PCT and/or pellet inside. Remove these items prior
to washing. After washing, make sure the bags are reassembled correctly as
described above.
● Do not
place any items on top of the PTDS tray or under the bags, especially
while charging.
●
Periodically check the condition of the PCT. If it is cracked or damaged, it
should be replaced immediately.
●
Periodically check the condition of the CookTek pellet. If the pellet appears
damaged, it should be replaced immediately.
●
Do not place any foreigh objects or paper under the PTDS unit. These items
may obstruct the fan intake, causing the unit to overheat.
●
Do not place more than one bag at a time on the PTDS unit.
Questions? Contact CookTek Customer Service
+1-888-COOKTEK ● www.CookTek.com
SPECIAL NOTES - PTDS
