APPLICATIONS
56
8 Applications
8.1 Software application «SMS-generator 005» to setup system
This application is designed for programming and setting of system Convoy iGSM-005 and Convoy iGSM-
005 CAN by means of service SMS.
Application interface allows to set both installation and user’s functions easily and intuitively.
If you suppose to use this application regularly, we recommend you to install it on your PC by launching file
Convoy 005_ eng_instal.exe
.
Once standard installation procedure is over you’ll be able to launch «SMS-generator Convoy 005» using
icon of your desktop (or from any folder specified during installation).
If you plan to use this application only now (for example, you use foreign PC) launch file
Convoy 005_eng_
mob.exe
from folder «
SMS-generator 005 (eng.mob.)
».
ATTENTION!
In order to provide proper application functioning folder «Config» and file Convoy 005_eng_ mob.exe should
be located at the same computer level (in one folder).
Application functioning description
After startup screen interface upper par t («header») with seven tabs will be opened.
In «header» user can change phone number for system reply, its PIN-code and also choose typical settings
and request for current system configurations (current parameters, settings and set functions).
Tabs:
1.
User settings.
This tab settings allow to set system account verification procedure, turn on/off
immobilizer mode and set siren signals, set quantity of calls to one user when arming/disarming and in alarm
mode, change PIN-code for access to system and also adjust its built-in shock/inclination/motion sensors,
microphone and speaker. You can also turn on/off and adjust system monitoring (tracking) mode.
