27
SYSTEM PROGRAMMING AND SETTING
6 System programming and setting
Programming and setting of GSM-system is performed using SMS or service button.
6.1 User settings
6.1.1 PIN-code change
System factory PIN-code is «
0000
». To change PIN-code (see item 2.3) enter the following command in
SMS text:
NEWPIN xxxx
where
хxxx
– four digits of new PIN-code (every from 0 to 9)
Af ter receipt SMS with this command system will send report with PIN-code change confirmation:
NEWPIN xxxx
or
NEWPIN fail
(if new PIN-code is incorrect))
6.1.2 Setting phone number for system account check
To check system account status and automatic check using your cell phone keyboard, specify for GSM-
system account check number of GSM-operator (whose SIM-card is installed into GSM-system). To do this
enter the following command in SMS text:
BALANS ''*xxx#''
where
хxx
– number of USSD-request of mobile operator’s account balance
Balance request numbers of some mobile operators of Ukraine:
Kyivstar, Djuice, Life, Beeline
111
МТС
101
UTEL
100
Af ter SMS-receipt system will reply:
BALANS *xxx#
6.1.3 Setting account auto check
Automatic account check is per formed in specified time using USSD-request to programmed number (see
sub-item 6.1.2). After receipt of SMS report of operator system will process it: all symbols (not digits, including
points and commas) will be deleted from reply and remaining digits will arrange one after another with spaces
instead of deleted symbols.
Variant of report of KYIVSTAR operator about account balance:
Na rahunku: 50.95grn. Info pro bonusy na *112#, *119#. Telefon vid 599 grn ta INTERNET
BEZ MEZH! Info: 922*922*
Result of report processing by GSM-system:
50 95 112 119 599 922 922
Whole part of balance is account is “50” which is at the first position in report. To check account balance
automatically enter the following command in SMS text (see item 2.3):
AUTOCHECK a b c
where
a
– position number of whole part in GSM-operator text of message with information about account status
(1-10. 0 – automatic account check is of f)
b
– critical money amount on system account (1-225. 10 - on default)
с
– time period after which system will check account status (1-24 hours. 24 – by default)
System SMS report on this command:
AUTOCHECK a,b,c
Note
Command without a,b,c can be used for current settings request of automatic GSM-system account
balance check.
6.1.4 Users list programming
In alarm mode system will call and/or send SMS to phone n umbers of 5 programmed users. Each user
has two sets of alarm/service notifications which specify on which of them system will call and on which send
SMS.
