SYSTEM SERVICE FUNCTIONS
24
Codes of Top Up of some mobile operators of Ukraine:
Kyivstar, Djuice, Life
123
МТС
100
Beeline
101
UTEL
111
Note
The balance of the system account you can Top Up in any i-BOX, using Internet services or any other
possible method.
5.8 Locating of system (car) location
5.8.1 Using mobile network operator
Some GSM-operators allow requesting cell phone geographical location. This function can be used in order
to determine GSM system (car) location.
To find GSM-system location using SMS (see item 2.3) enter the following command in SMS-text:
USSD *xxx*1*yyyyyyyyyyyy#
where
xxx
– location request code for mobile operator
yyyyyyyyyyy
– phone number to which information about the coordinates of GSM-system should be sent
SMS with the name of the nearest to the car streets and WAP-link to the map fragment showing car’s
location will be sent to the specified phone number.
Note
If location of GSM-retransmitters in relation to the car does not allow determining exact car location, you
will find on the map not point, but sector of car possible location.
5.8.2 Using option GPS-module
If GPS-module Convoy GPSM-003 is used together with GSM-system you may detect car location using
GPS-navigation. In this case GSM-system (car) location detection accuracy is much higher.
To find system GPS-location using SMS (see item 2.3) enter the following command in SMS-text:
GPS?
Af ter receipt SMS with this command GSM-system will send SMS to the number from which it has
received the request:
GPS: a SAT = b; UTC: c, d h
where
a
=
(A/NA)
– actuality/not actuality of information about coordinate point for this moment
b
– satellites quantity, information from which was used
c
– Greenwich time
d
– date
h
– Google maps link (http://...)
Note
If you cell phone supports GPRS-connection, you are able to see system location (point) on Google map
online.
If you have installed navigation software (programs which have Google maps) in your cell phone, geographical
coordinates of point received from GSM-system will be automatically transferred to this software.
If GPS-module for the moment of request is not connected to the GSM-system (or modules power is of f)
system will send SMS to that phone number from which it has received the request:
No GPS
5.9 System call by user request
Sometimes it is required that GSM-system calls user not only because of alarm/service event. For this
enter the following command in SMS-text (see item 2.3):
CALLME
After this SMS-receipt system will call current user. User can control system after connection (from
voice menu) without PIN-code input.
