Cleaning and Maintenance
CONVOVent mini / mini 2in1
28
►
Cleaning and maintenance schedule
Contact with cleaning agents
Risk of skin and eye irritation / chemical skin burns
Direct contact with cleaning agents poses a risk of irritation or burns to the skin and eyes.
Do not inhale the spray mist.
Do not let the cleaning agent come into contact with eyes or skin.
Do not heat the appliance if it contains a cleaning.
Let the appliance cool down before spraying cleaning into the appliance.
Wear protective gloves and safety goggles in accordance with the specifications of the cleaning
agent manufacturer and the safety regulations indicated in the EC material safety data sheets.
Requirements
Check that the following requirements have been met before carrying out any cleaning or maintenance
tasks:
You are already conversant with the operating steps listed under "Operation" and "How to do it
correctly".
Required cleaning products
Common household, non-alkaline detergent that is gentle on the skin and is pH-neutral
Required materials
Sponge, sponge cloth, cleaning products in a suitable container, e.g. pail.
Cleaning procedure
To clean the hood, follow the steps below:
Step
Action
1
Switch the combi steamer off and allow the hood to run until the
appliances have cooled down.
Caution:
Risk of burns from touching the hot surfaces of the hood if the
combi steamer was running before cleaning.
2
Power off the hood.
3
Remove the front panel of the hood.
Clean the hood front panel in the dishwasher once a week.
Removing and fitting the front
panel
on page 32
4
Clean the outside of the hood case with a hot, mild detergent
solution once a week.
Do not let the fan come into contact with cleaning agents during
cleaning.
5
Dry the hood case with a cloth.
6
Fit the clean front panel of the hood.
Please note
Dot not, under any circumstance, use scouring powders or heavy-duty scouring sponges. These will
damage the hood.
