Manual CC 5351 DIR
9
Installation
1. Dome Base Mounting
- Open the dome cover by loosening the ring
- Mount the base of camera to a sturdy surface using 2 screws and 2 premade holes on the base of the
dome.
2. Power Connect & Monitor Impedance
- DC12V/1000mA, AC24V/500mA regulated power supply.
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75
Ω
. Check the impedance switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction and angle of camera.
- Make sure to retighten the screws for camera bracket.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten the ring.
