Manual CC 5351 DIR
13
Shutter (conditions and speed control)
Auto or manual control can be selected.
1. When the SETUP menu is on the screen, please position the arrow to point to SHUTTER
by using the UP and DOWN buttons.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK:
Please select FLK mode when flickering occurs on the screen, due to an imbalance
between illumination and frequency.
NTSC Model:1/100, PAL Model: 1/120
ESC:
Auto control of the shutter speed can be achieved. When ESC mode is on, the speed is
controlled automatically according to the brightness of the screen.
MANUAL:
The shutter speed can be controlled manually.
3. Please select 'MANUAL' mode if you wish to adjust the shutter manually.
• You can select speed from 1/60 to 1/120,000 sec (NTSC Models), 1/50 to 1/120,000 sec
(PAL Models).
4. Please press the SETUP button when all the settings are complete.
Note
• While using the internal synchronous system, if the shutter setting is on ESC and the camera
is directly facing a bright fluorescent light, the image on the screen can be adversely
affected. Therefore please choose the installation location with care.
• When ‘MANUAL’ mode is on, the SENS UP function does not operate.
