background image

Manual CC 5304IR 

2

 

 
 

 
 

 
 

 
 

The lightning flash with an arrowhead symbol, within an equilateral 
triangle is intended to alert the user to the presence of uninsulated 

dangerous voltage within the product's enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons. 

 
 

 
 

The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating and maintenance 

(servicing) instructions in the literature accompanying the appliance. 

 

INFORMATION - 

This equipment has been tested and found to comply with 

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. 

These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, may cause 

harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at 
his own expense. 

 
WARNING - 

Changes or modifications not expressly approved by the 

manufacturer could void the user’s authority to operate the equipment. 

 

CAUTION : 

To prevent electric shock and risk of fire hazards: 

™

 

Do NOT use power sources other than those specified. 

™

 

Do NOT expose this appliance to rain or moisture. 

 

 

This Installation should be made by a qualified service person and should confirm to all local codes. 

 
 

 
 

 
 

 
 

 
 

Содержание CC-5304 IR
























Отзывы: