Manual CC 5304IR
18
4) Up to 15 characters can be used for the camera ID.
•
Move the cursor to the letter required by using the UP and DOWN button.
•
Select an ID from A, B~Y, Z, a, b ~ y, z, 0,1~8,9 by using the UP, DOWN, LEFT and RIGHT buttons.
•
Lock in the characters by using the SET button. Once locked in the cursor moves to the next space in
the ID.
•
Repeat the above steps until the ID is complete.
Note
Press the SET button after moving the cursor to CLR and all the letters will be
erased. If you want to correct a letter move the cursor to the arrow at the bottom
left of the screen and press 'SET'.
Position the cursor above the letter you wish to correct and then move the cursor
onto the letter you wish to choose and press the SET button.
5) When the camera ID is complete, select a position for the name to be
displayed.
•
Move the cursor onto 'POS' and then press the SET button.
•
The ID appears in the top left corner.
•
Select the position where the ID is to be displayed
by using the 4 directional buttons, and then press
the SET button.
6) Select 'END' and press the SET button to complete ID input.
