Manual CC 5304IR
13
3.
Press the SET button if you which to return to the previous menu.
Shutter (condition and speed control)
Auto or manual control can be selected.
1. When the SETUP menu is on the screen, position the cursor to point to SHUTTER by
using the UP and DOWN buttons.
2. Select the shutter mode by pressing the LEFT or RIGHT button.
¾
FLK
: Select 'FLK' mode when flickering occurs on the screen
due to an imbalance between illumination and frequency.
NTSC Model:1/100, PAL Model: 1/120
NTSC Model:1/100, PAL Model: 1/120
¾
ESC
: Auto control of the shutter speed is enabled.
When ESC mode is on, the shutter speed is controlled automatically
according to the brightness of the scene.
¾
MANUAL
: The shutter speed can be controlled manually.
3. Select 'MANUAL' mode for manual shutter speed adjustment.
• Selectable speeds are from ‘1/60’ to ‘1/120,000’sec (NTSC) and ‘1/50’ to ‘1/120,000’sec (PAL).
4. Press the SET button when the settings are completed.
Notiz
• While using the internal synchronous system, if the shutter settings is on ESC and the camera is
directly facing bright fluorescent lights the image on the screen can be adversely affected-therefore
choose the installation location carefully.
• When MANUAL mode is on, the SENS UP function cannot be used.
White Balance
The screen colours can be adjusted using the WHITE BALANCE function.
1. Position the cursor to point to WHITE BAL on the menu by using the UP and DOWN
buttons.
2. Select the mode you wish to adjust by pressing the LEFT or RIGHT buttons.
