Convey HC-1EX Server Quick Start Guide v1.3
16
Callout
Feature
Function
E.
Hard Disk Drive
Activity LED
Random blinking green light indicates hard disk drive
activity
No light indicates no hard disk drive activity.
F.
System Status LED Solid green indicates normal operation.
Blinking green indicates degraded performance.
Blinking amber indicates a non-critical condition.
Solid amber indicates a critical or non-recoverable
condition.
No light indicates POST is running or the system is off.
G.
System
Identification
LED
Solid blue indicates system identification is active. Flashing
blue indicates power up sequence in process.
No light indicates system identification is not activated.
H.
System
Identification
Button
Turns on/off the system identification LED.
I.
Reset Button
Reboots and initializes the system.
J.
USB 2.0 Port
Allows you to attach a USB component to the front of the
chassis.
K.
NMI Button
Puts the server in a halt-state for diagnostic purposes.
L.
Video Port
Allows you to attach a video monitor to the front of the
chassis. The front and rear video ports cannot be used at
the same time.
NOTE: Note: the video port option is only available on the
hot- swap drive system (product code SR1560SFHS).
Peripheral Devices
3.4.2
The server system provides locations and hardware for installing hard drives, a USB
floppy drive, and an optical drive. The drives configurations (population and capacity) are
optional. The following figure shows the available locations.
