Convey HC-1EX Server Quick Start Guide v1.3
6
Move the HC-1EX chassis between the extended slides and position the 6
chassis mounting lugs (3 on each side) in line with the slots in the slides
Lower the chassis into the slots
Push the chassis slightly to the rear until the retainers click into the locked position
Push the chassis carefully into the cabinet.
Install one 10-32 screw into the lower hole of the system mounting brackets on
each side to retain the system in the rack.
A. Mounting lugs
C. Mount retainer
B. Mounting slot
D. Slide extension latch
Figure 2 System Mounting to Slides
Convey recommends you install systems from the bottom of the rack to the top. In other
words, install the first system in the rack into the bottom position of the rack, the second
system in the second position from the bottom, and so on. Instructions for installing your
chassis into a rack are included in each rack mount option kit.
