Converters.TV 15437, Руководство по эксплуатации

Страница: 7 / 12

RS-232 and Telnet
Commands
Command Description
A1~A8 Switch Output A to 1~8
B1~B8 Switch Output B to 1~8
C1~C8 Switch Output C to 1~8
D1~D8 Switch Output D to 1~8
E1~E8 Switch Output E to 1~8
F1~F8 Switch Output F to 1~8
G1~G8 Switch Output G to 1~8
H1~H8 Switch Output H to 1~8
ABCD...1~ABCD...8
Switch Output A B C D... to 1~8 at
the same time
SETIP <IP> <SubNet> <GW> Setting IP. SubNet. GateWay (Static
IP)
RSTIP IP Configuration Was Reset To
Factory Defaults <DHCP>
IPCONFIG Display the current IP config
P0 Power OFF
P1 Power ON
I1~I8
Switch all the Output to 1~8
ST Display the current matrix status and
F/W version
RS
System Reset to A1, B2, C3, D4, E5,
F6, G7, H8
EM Setting EDID MODE. 1-STD 2-TV
UARTBAUD1~8
Set output A~D’s uart baud rate from
1~6
1: 9600bps
2: 14400bps
3: 19200bps
4: 38400bps
5: 57600bps
6: 115200bps
UARTSW1~8
Switch output’s UARTto A~H and
allow Matrix to send commands to
Receiver's connected RS-232
device.