Once in the command line interface (CLI) type "telnet", the IP address
of the unit
you wish to control and "23", then hit enter.
Note:
The IP address of the Matrix can be displayed on the device's LCM monitor by
pressing the Menu button twice/three times.
This will bring us into the device which we wish to control. Type "HELP" to list the
available commands.
Type “IPCONFIG” To show all IP configurations. To reset the IP, type “RSTIP”
and to use a set static IP, type ”SETIP” (For a full list of commands, see Telnet
Commands Section).
Note:
Any commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive. If the IP is changed then the IP Address
required for Telnet access will also change accordingly.
Содержание 15437
Страница 1: ...4K UHD Matrix 8 8 HDMI over HDBaseT with 24V PoC 15437 Operation Manual ...
Страница 12: ...Connection Diagram ...
