Using the timer
When activating the timer, the Diva provides 1500 watts of power combining radiant
and fan-forced heating, for short periods of time (during a bath or shower).
- With the heater on, press the timer switch. Continue pressing on the timer switch to set
the desired time or to turn the timer off in the following sequence : ½ hr, 1 hr, 2hr Off. Each
timer indicator light shows the selected time.
- When the timer is engaged, the heater provides maximum heat continuously for the
selected duration (½ hr, 1 hr, 2 hr).
- When the timer cycle is finished, the heater resumes normal heating operation.
Unheated ventilation (”Summer mode”)
This setting will dry towels without heat.
- With the heater on, press the unheated ventilation switch. The corresponding indicator
light turns on.
- This function turns the ventilation on for ½ hr and the ½ hr timer indicator comes on.
- Press the timer switch to select 1hr, 2hr or to stop the unheated ventilation.
- When the cycle is finished, the unheated ventilation indicator light remains on.
- To start the unheated ventilation again, press the timer switch for the selected duration.
- To turn the unheated ventilation off, press the On/Off/Turbo switch briefly (shutting the
heater off).
TURBO Mode
During colder periods, this special setting allows your Diva to act as a 1500 watt heater with
thermostat control, using both radiant and fan-forced heat.
- With the heater on, press and hold the On/Off/Turbo switch for 3 seconds or until the
On/Off indicator light starts blinking.
- Set the thermostat as desired. It is normal to hear the fan go on and off.
- To revert to standard operating mode, press and hold the On/Off/Turbo switch for 3
seconds or until the indicator light stops blinking.
- To shut the heater off, press briefly on the On/Off switch, the On/Off indicator light will
shut off.
NOTE
In case of a power failure, your Diva keeps the last settings in memory, including the time
remaining on the timer cycle and resumes operation where it left off.
8.
