RECOMMANDATIONS DE MISE EN PLACE
1
OPERATING INSTRUCTIONS
5
To turn the heater On :
- Press briefly on the On/Off/Turbo switch. The On/Off indicator light turns on.
- To shut the heater off, press the On/Off/Turbo switch briefly. The On/Off indicator light
goes off.
Using the themostat to set the comfort temperature :
The Diva provides base heat for the bathroom using its front panel as a radiant heating
element, controlled by an electronic thermostat, for superior comfort and maximum
efficiency.
- Turn the thermostat dial to 6 ( Fig.5). The heat indicator light will come on if needed to
show that the front panel heating element has been turned on.
- Close the doors and windows to the room where the heater is located. Let the
temperature stabilize for an hour.
- If the temperature is not quite right, adjust the thermostat dial up or down by half a mark.
- Let the temperature stabilize for another hour before checking again and repeat if
necessary (with a quarter adjustment this time).
- Once the thermostat is set at the desired comfort setting, do not touch the thermostat
dial. To turn the heater off, use the On/Off/Turbo switch. To briefly raise the temperature,
use the timer.
7.
Heating indicator
Comfort zone
Thermostat
adjustment
On/Off indicator
On/Off/Turbo switch
Timer switch
(1/2 hour, 1 hour, 2 hours)
Timer indicator
“Summer mode” indicator
Unheated ventilation
switch ( “Summer mode”)
Fig. 5
The electronic controls have been designed to achieve maximum savings.
