4
MODEL MASTERCOOL ONLY
Place the reservoir onto the base and press
down to engage the four clips in the base
(Fig 10).
To remove the cooler from the base, tip it
upside down and release the clips in the
base. A screwdriver may be necessary.
HOW TO GET THE BEST COOLING
PERFORMANCE
Place the cooler with its back near to an
open window or door so it can draw in 100%
fresh air.
Open another window or door on the
opposite side of the room for “flow through”
ventilation. This cooler will not cool properly
in a closed room (Fig 11).
ILL1219-A
10
ILL871-A
11
ILL872-A
12
ILL873-B
FULL
EMPTY
13
FILLING WITH WATER
Turn the cooler off before filling. Open the
water filling door and pour in clean water
(Fig 12).
The water capacity is 14 litres. The minimum
amount of water needed for the pump to
operate is 2 litres.
The cooler is full when the water level
indicator is in the “FULL” position
(Fig 13).
! The cooler and pump will not be
damaged if operated without water.
Do not overfill, as water will spill
out of the cooler!
Note
