6
AIR DIRECTION CONTROL MEGACOOL
Model Megacool has motor driven vanes
that are switched on and off by the fan
control switch on the control panel (Fig 18).
Set the control to the “sweep / fan” speed
setting to operate the sweep vanes
(shown).
Set to “fan” speed settings for
fixed direction.
There are no manual adjustment levers.
CLEANING THE COOLER
Important! Always switch off and remove
the electrical plug before cleaning and
servicing the cooler.
To clean, wipe the cooler with a damp cloth
and a little household detergent.
The rear panel can be removed to gain
access to inside the cooler by removing the
screws at the top of each side.
Pivot the panel backwards and lift off
(Fig 20).
I L L 8 8 0 - B
20
SAFETY INSTRUCTIONS
As this cooler contains water, ensure it is
moved carefully and is not tilted , as water
may spill (Fig 19).
I L L 8 7 8 - B
19
18
ILL1436-A
