4
(6) Check and, if necessary, clean the water
spreaders located inside the roof above the filter
pads.
(7) Drain the water from the unit (on units fitted
with drain systems this happens automatically).
On other units remove the overflow or overflow
bleed funnel.
(8) Check pulleys for wear and correct alignment.
(9) Check "V" belt for wear.
(10) Thoroughly clean and dry the bottom of the
water tank.
(11) Replace filter pad frames. Ensure they are
the correct way up.
(12) If water flow appears low, there may be a
problem with foreign material clogging the pump
or pump strainer. To correct, remove pump,
dismantle base, clean and reassemble.
Do not replace this item until next
season. Do not lose the "O" ring seal.
During the Winter Months:
EX models:
O t h e r
M o d e l s :
Local Regulations:
Are fitted with
and have Celdek filter pads.
The
automatically
latches minimising cold drafts and
loss of
warmth.
Celdek pads are specially treated and don't need
any additional protection.
A w e a t h e r c o v e r i s
recommended to prevent cold drafts.
In some areas and for some
commercial installations local regulations have
specific requirements for the maintenance of
evaporative air conditioning systems.
Generally these involve regular maintenance at
(3) monthly intervals or more frequently if
necessary.
AUTOweatherseal
AUTOweatherseal
TM
TM
damper
damper
GETTING THE BEST RESULTS
ILL191-A
5
