6
INSTALLATION REPORT/SERVICE
CHECKLIST
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Unit level and secure.
All roof or other penetrations
properly sealed.
Ductwork completed and air
distribution checked and outlets
correctly set.
Mains wiring complete.
Control switch correctly installed.
Belt tension and alignment
correctly adjusted.
Fan runs in correct direction at all
speeds (clockwise when viewed
from pulley side).
Motor power (tong) tested.
Power input to motor recorded
High
amps.
Low
amps.
Motor pulley adjusted and tight on
shaft.
Water bleed/drain/overflow fitting
correctly installed.
Water level and float adjustment
checked.
Filter material (wood wool) evenly
packed in all pad frames.
Pump runs and water evenly
distributed to all filter pads.
Bleed rate adjusted to
lt/min.
All control functions checked.
Owner instructed in correct
operating procedure.
Owners Name:
Telephone:
Address:
Dealer:
Installer:
Date Installed:
Model No.:
Serial No.:
If you have followed the instructions and still have
problems, the SEELEY service network is only a phone
call away. They can help with any aspect of operation
you may not be sure of, or arrange for a service person to
fix any faults.
However, please bear in mind that if a service call reveals
no fault with the CONVAIR unit, you may be charged for
the call, even during the warranty period. In the first
instance we recommend you contact the retailer from
whom you purchased the unit. They will be familiar with
your installation and will be anxious to rectify any
difficulties.
