Controls iMech Series, Руководство по эксплуатации продукта

Страница: 16 / 17

CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 15 -
8) Sender Configuration
Allows the user or OEM to set up the proper sender types and engine safety limits of the module. Options
include the following. Defaults in
[ ].
8.1 Press & Temp Units
–
Metric, [English]
8.2 Sender Check Bypass
–
5
– 60 Sec,
[10]
8.3 Fuel Sender
– VDO,
[S-W]
8.4 Fuel Level Check
– Never, Always,
[Run]
8.5 Low Fuel Prealarm
– 0-100%
[20]
8.6 Low Fuel Alarm
– 0-100%
[1%]
8.7 Fuel Alarm Delay- 0
– 100 Sec,
[5]
8.8 Low Oil Press Check
– Never, Always,
[Run]
8.9 Low Oil Press Prealarm
– 0-100 PSI
[15]
8.10 Low Oil Press Alarm
– 0-100 PSI
[10]
8.11 Oil Press Alarm Delay- 0
– 100 Sec,
[5]
8.12 Temp Check
– Never, Always,
[Run]
8.13 Low Temp Prealarm
– 0 - 300 F
[0]
8.14 Low Temp Alarm
– – 0 - 300 F
[0]
8.15 High Temp Prealarm
– 0 - 300 F
[220]
8.16 High Temp Alarm
– – 0 - 300 F
[230]
8.17 Temp Alarm Delay- 0
– 100 Sec,
[5]
8.18 Battery Volts Check
– [Never]
, Always, Run
8.19 Low Bat Prealarm
– 0.0 – 40.0 VDC
[12.0]
8.20 Low Bat Alarm
– 0.0 – 40.0 VDC
[0.0]
8.21 High Bat Prealarm - 0.0
– 40.0 VDC
[15.0]
8.22 High Bat Alarm
– 0.0 – 40.0 VDC
[40.0]
8.23 Bat Alarm Delay- 0
– 100 Sec,
[5]
8.24 Over Speed Check
–
[Never] , Always, Run
8.25 Over Speed Alarm
– 0-5000 PSI
[3000]
9) Calibration
Allows the user or OEM to trim specific parameters of the module. Defaults in [ ].
9.1 Battery Trim
–
0-1000mV, [500mV]
9.2 Flywheel Teeth
–
1-200, [100]
9.3 Auto Set Teeth? -Yes, [No]