Controls iMech Series, Руководство по эксплуатации продукта

Страница: 15 / 17

CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 14 -
7) Module Configuration
Allows the user or OEM to set up the proper behavior and functionality of the module. Options include the
following. Defaults in
[ ].
7.1 Preheat Time
–
Programmable in minutes and seconds. [0.00]
7.2 Hour Meter
–
Programmable in hours. [0]
7.3 Clear Op Log
– Yes,
[No]
7.4 Clear Alarm Log
– Yes,
[No]
7.5 Throttle Type
–
[None], Hi/Low, Momentary
7.6 Relay 1 Function
–
[None], Prealarm, Alarm, Engine Run, Switch Trip, Fuel/Run, Preheat, Throttle
B0, Throttle B1, Start Warning, Crank*
7.7 Relay 1 Polarity- [Positive] , Invert
7.8 Relay 1 Init State
– [Off]
, On
7.9 Relay 2 Function
– None
, Prealarm, Alarm, Engine Run, Switch Trip, [Fuel/Run], Preheat, Throttle
B0, Throttle B1, Start Warning, Crank*
7.10 Relay 2 Polarity- [Positive] , Invert
7.11 Relay 2 Init State
–
Off, [On]
7.12 Relay 3 Function
– None, Prealarm, Alarm, Engine Run, Switch Trip, Fuel/Run,
[Preheat], Throttle
B0, Throttle B1, Start Warning, Crank*
7.13 Relay 3 Polarity- [Positive] , Invert
7.14 Relay 3 Init State
– [Off]
, On
7.15 Relay 4 Function
– [
None] , Prealarm, Alarm, Engine Run, Switch Trip, Fuel/Run, Preheat , Throttle
B0, Throttle B1, Start Warning, Crank*
7.16 Relay 4 Polarity- [Positive] , Invert
7.17 Relay 4 Init State
– [Off]
, On
7.18 Input (Flex Digital) Normally
– [Open]
, Closed
7.19 Trip Action
–
[ Nothing] , Prealarm, Alarm
7.20 Input Check
–
[Never], Always, Run
7.21 Trip Message
–
[None], Low Water, Low Oil, Hi Temp, Low Press, Custom.
7.22 Top Line Message
– Write your own.
7.23 Bottom Line Message
– Write your own.
7.24 LCD Contrast
– 0-100%,
[55%], Automatic adjustment based on temperature.
7.25 LCD Backlight
– 0-100%,
[100%]
* When used in auto start configurations.