CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 10 -
6) Controller Menus
6.1 The control panel has menus to view engine and controller parameters. These menus are accessible via the
four-button pad located on the face of the control panel.
6.2 Menu Rings
Menu Category
Use
Operation Event Log
View last 16 events
Alarms Event Log
View last 16 alarms
Auto Start Configuration*
Set time delays and cycles.
Sender Configuration
Set units, senders, and limits.
Module Configuration
Set logic, relays, inputs, hours
Calibration
Set speed signal to engine.
Module Information
View model and firmware version
* When used in auto start configurations.
6.3 Menu Access & Navigation
6.3.1
Accessing Menus
1. Press and hold the MENU key & simultaneously press the ENTER key.
