www.ControlloCasa.it
+39 06 94804820
displayed in the list of WiFi networks, disable and re-enable WiFi on your PC/Mac. Then
repeat the search for the network created by USBy.
=========================================================================
Once USBy is connected to your WIFi Network, the network created by USBy will no longer
be present in the list of WiFi Networks displayed by your PC/Mac.
=========================================================================
The WiFi network chosen to connect USBy must be password protected
=========================================================================
If the current failure / recovery notification emails are not received, check whether they
have been identified as spam (Spam) in your mailbox.
=========================================================================
In case of continuous power failure / recovery warnings, check that USBy is installed near
the Router / Modem (ca. 1-3 meters)
=========================================================================
In the event that, during the authentication phase on the www.controllocasa.it website
using an iPhone with version 12.x or higher, the error message "User non-existent" is
displayed, you must:
•
Select the Settings => Safari => Advanced => Experimental Feature application on your
iPhone and disable the "Swap Processes on Cross-Site Navigation" item
•
Try to access the site www.controllocasa.it using Safari again