www.ControlloCasa.it
+39 06 94804820
2.
USER MANUAL (ENGLISH)
Hello,
In order to present USBy and help our Customers during its configuration, we have created a
video that can be visualized by clicking on the following link:
http://controllocasa.com/usby-v2-configuration
Please, follow the instructions below to Initialize and Configure USBy.
2.1
USBy Initialization
In order to initialize USBy you have to:
•
Connect USBy to the Router/Modem
•
Activate USBy
2.1.1
Connect USBy to the Router / Modem
1.
Turn on USBy by preferably connecting it to the USB port of your Router/Modem or to
the electrical outlet using an adapter (e.g. adapter used to charge mobile phones) near
the Router / Modem (ca. 1-3m)
2.
Make sure that the light on the inscription "USBy" lights up when you switch it on
3.
From your PC/Mac open the list of WiFi networks and select the network created by
USBy (e.g. USBy-V3_XXXXXX)
Note-1: It is normal for the WiFi networks icon to show that there is no Internet
access (sometimes highlighted with the "!" symbol). In fact, you are currently
connected to the local network created by USBy which, not yet connected to your
Router / Modem, cannot access the Internet.
Note-2: If the network created by USBy is not displayed in the list of WiFi networks,
deactivate and reactivate WiFi on your PC/Mac. Then, wait a few seconds and repeat
the search for the network created by USBy.
4.
Open your web browser and enter the following address : 192.168.4.1
At this point the following graphic interface will be displayed which will allow you to
view a video prepared to support you during the configuration phase of USBy or, by
selecting the English language, to proceed directly with the configuration of USBy.
