HOW TO OPERATE
HAND TRANSMITTER
Make sure the slide switch on the side is in the middle
position. Press the button for ½ second to OPEN or
CLOSE the door.
KEY-RING TRANSMITTER
Press the left button for ½ second to OPEN or CLOSE
the door.
IMPORTANT:
The range for the hand transmitter
to reverse or stop the door is always
less than to start the door.
•
Always have the door in view when operating.
•
Aim through windscreen.
•
Check that door is fully closed before driving away.
Pressing the hand transmitter, or UP.STOP.DOWN,
while the door is moving down will send the door
back up.
Pressing the hand transmitter or UP.STOP.DOWN
while the door is going up will stop the door.
Next time the hand transmitter or UP.STOP.DOWN
is pressed, the door will close.
KEY-RING
TRANSMITTER
L.H.S. BUTTON
WALL CONTROL PANEL
UP.STOP.DOWN BUTTON
Touch to OPEN or CLOSE door.
LIGHT BUTTON
Touch to turn LIGHT ON (when Controll-A-Door is not being
operating). Touch again for OFF. Light automatically turns off
after Controll-A-Door operation.
MUTE BUTTON
Touch to cancel beeps. Touch again to resume beeps.
(For safety, the reversing warning beeps cannot be muted.)
SHUT DOWN BUTTON
Touch to prevent Controll-A-Door being operated.
Touch again to resume normal operation.
Door position
indicator and
light display.
For Flashing
Lights, see
page 6.
For Code Setting,
see page 4.
Lower Control Panel.
•
To set limits of door travel. See page 4.
•
To set radio code. See page 4.
•
Overload Reset. See page 6.
For access to Lower Control Panel
use screwdriver as shown.
Push in, then lever.
2
