background image

 

fournie pour votre sécurité. Si la fiche fournie ne s'adapte pas à votre prise, consultez un 

électricien pour le remplacement de la prise obsolète. 

 

10. Only use attachments/accessories specified by the manufacturer.  

   Utilisez uniquement des fixations / accessoires spécifiés par le fabricant. 

 

11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or 

sold with the apparatus. When a cart is used, use caution when moving the 

cart/apparatus combination to avoid injury from tip-over.  

   Utilisez uniquement avec le chariot, le socle, le trépied, le support ou la table spécifiés 

par le fabricant ou vendu avec l'appareil. Lorsque vous utilisez un chariot, soyez prudent 

lorsque vous déplacez l'ensemble chariot / appareil pour éviter des blessures dues au 

renversement. 

 

 

12. Unplug this apparatus during lightning storms or when unused for long periods of time.  

  

   Débr

anchez cet

 

appareil pendant les orages ou lorsqu'il n'est pas utilisé pendant de 

longues périodes de temps.  

 

13. Warning! Install this equipment in accordance with all national, state, and local electrical 

codes and must be completed by a certified electrician.  For supply connections use 14 

AWG only that is suitable for at least 600C.  This equipment must be mounted at height 

less than or equal to 2m.  This equipment may only be used with, and requires the use of, 

one of the following separately certified Wall-Box models, C4-NWB57C-M, C4-NWB57C-

P, C4-RWB57C-M, C4-RWB57C-P. 
Attention! Installez cet équipement conformément à tous les codes électriques nationaux, 

provinciaux et locaux et doit être effectué par un électricien certifié. Pour les connexions 

d'alimentation, utilisez uniquement 14 AWG qui convient à au moins 600C. Cet 

équipement doit être monté à une hauteur inférieure ou égale à 2 m. Cet équipement ne 

peut être utilisé qu'avec l'un des modèles de boîtiers muraux certifiés séparément 

suivants, C4-NWB57C-M, C4-NWB57C-P, C4-RWB57C-M, C4-RWB57C-P. 

 

14. Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is 

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus 

has been exposed to rain or moisture, does not operate normally, or has been dropped. 

   Confiez toutes les réparations à un personnel qualifié. Une réparation est nécessaire 

lorsque l'appareil a été endommagé de quelque façon que ce soit le cordon 

d'alimentation ou la fiche est endommagé, du liquide a été renversé ou si des objets sont 

tombés dans l'appareil, l'appareil a été exposé à la pluie ou à l'humidité, ne fonctionne 

pas normalement, ou s'il est tombé. 

 

15. This equipment uses AC power which can be subjected to electrical surges, typically 

lightning transients which are very destructive to customer terminal equipment connected 

to AC power sources.  The warranty for this equipment does not cover damage caused 

by electrical surge or lightning transients.  To reduce the risk of this equipment becoming 

damaged it is suggested that the customer consider installing a surge arrestor. 

   Cet équipement utilise la puissance AC qui peuvent être soumis à des surtensions 

électriques, la foudre généralement transitoires qui sont très destructives envers les 

équipements terminaux connectés à des sources d'alimentation CA. La garantie de cet 

Содержание C4-T4T10-BL























Отзывы: