16
Connect to the Network
If you are using an Ethernet connection for the Home
Theater Controller, plug the data cable from the home
network connection into the Home Theater Controller RJ-
45 port (labeled “Ethernet”) and the network port on the
wall or at the network switch.
Power Up the Home Theater Controller
Plug the Home Theater Controller power cord (provided)
into the Home Theater Controller power plug port and an
electrical outlet.
Video Sense In-Out (2 pairs)
—Composite
In-Out port pairs for monitoring up to 2 video
In sources, such as DVD players or VCRs,
that allow the system to determine the On/Off
status of devices. Each Out port allows the
signal to loop through the Home Theater Controller
and continue to its intended video connection. See
“Use Video Sense Loops” for more information.
1.
2.
Video Sense In (2 singles)
—Composite In
ports for monitoring up to 2 additional video In
sources, such as DVD players or VCRs, that
allow the system to determine the On/Off status of
devices. These 2 ports do not have loop-through
support. See “Use Video Sense Loops” for more
information.
3.
4.
Connection Options and Typical Use
Reserved for:
