17
Connect Devices
You can use Interviewer within the Composer software on
a PC to walk you through the connection physical process
or you can set up the physical connections and then run
Interviewer to tell the Control4 system the applicable
connections.
Connect all applicable devices to the Home Theater
Controller using one of the available connection methods
including those described on Table 2-1, “Connection
Worksheet for Home Theater Controller”.
TIP:
Interviewer is a wizard that guides you through the
connection process. See “Configure the System” for more
information on configuring the software setup.
Connect all applicable devices to the Home Theater
Controller. The following sections provide guidelines on
making the various connections, including:
`
Use the Pluggable Terminal Block Connector
`
Connect to the Contact Port
`
Connect to the Relay Port
`
Connect the Serial Port
`
Set Up IR Emitters
`
Use Video Sense Loops
Use the Pluggable Terminal Block Connector
For the Contact, Relay, and Serial ports, the Home
Theater Controller makes use of a pluggable terminal
block connector—a removable plastic part with screws to
lock in individual wires. This connector is included.
