background image

1  Basic information

This chapter contains basic information on this operating manual and the Continental eBike System.

1.1  Reading and storing this operating manual

This operating manual accompanies the Continental eBike System (abbreviated: CeBS). 
The operating manual contains important information on using and changing the set-
tings of the Continental eBike System. This operating manual is based on the standards 
and regulations in force in the European Union. Read the entire operating manual care-

fully – especially the safety instructions (see Chapter 

“Safety warnings“ on page 10)

 – before using 

the Continental eBike System. If the warnings in the operating manual are not observed, it can lead 
to severe injury or damage to the CeBS. Store the operating manual in an easily accessible location 
for future use. If you pass on the Continental eBike System to a third party, you must also pass on 
the operating manual.

1.2  Intended use

The Continental eBike System is specifically intended for your eBike model. You must also observe 
the additional operating manual and safety warnings from the manufacturer of your eBike. The 
Continental eBike System is intended to be used with an eBike being used by one person. The 
eBike may only be used in the ways the eBike’s manufacturer intended. The manufacturer does 
not assume liability for damage arising from improper use. Only use the CeBS as described in this 
operating manual. Any other use is considered improper and can lead to accidents, severe injuries 
and damage to the CeBS. Avoid misuse (see Chapter 

“Safety warnings“ on page 10

) and check to 

make sure that the Continental eBike System is fully functional before each use. If you notice any 
defects, these must be repaired by a bicycle retailer immediately. If components of the CeBS must 
be replaced, only original replacement parts may be used – this is for your own safety and in order 
for your eBike to retain its value. Inspections at regular intervals may reveal material fatigue. Note 
the inspection intervals which you can have documented in the service history. The handover cer-
tificate and service history can be found at the end of this user manual (see Chapters 

“Handover 

certificate“ on page 37

 and 

“Service history“ on page 38

).

4

Continental eBike System

Содержание 36V BLE

















































Отзывы: