23
W415-0857 / B / 02.14.11
Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
Positioning the logs improperly will cause fl ame impingement and carboning.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. Phazer
TM
logs glow when exposed to direct fl ame. Use only certifi ed Phazer
TM
logs available from your authorized dealer
/ distributor.
G.
Like log #3, log #5 also comes in two
pieces. The base (#5a) slopes outwards
between logs #2 and #4.
As with pieces #3a & b, piece #5b fi ts over
piece #5a. Place the end of piece #5b onto
the pin.
H.
The upper end of log #5 rests in the groove,
on top of log #4 and creates the fi nal ap-
pearance of the log set.
8.3 CHARCOAL
EMBERS
32.1
Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
HOOD
CURTAIN SUPPORT
PLATE
HOOD
CURTAIN
MESH
The appliance must not be used when the hood is
removed. Hook the hood over the lip of the curtain sup-
port plate.
!
WARNING
APPLIANCE SCREENS MUST BE CLOSED WHILE THE APPLIANCE IS IN OPERATION.
8.4 HOOD