W415-4051 / C / 06.29.22
EN
25
venting installation
Fig. 4
Fig. 5
Fig. 6
Note orientation of dimples and standoffs.
note:
4. Roll the vent sleeve as shown and ensure to clip the ends together
(Figure 4)
.
5. Ensure both ends line up and secure ends with clip and fasteners
(Figure 5)
.
6. Insert the vent sleeve tabs into the firestop spacer slots then bend the tabs over to secure to the firestop spacer
along with 4 supplied fasteners
(Figure 6)
.
