Continental Fireplaces BCDV36CFGN, Инструкция по установке и эксплуатации

Страница: 21 / 68

21
W415-0803 / C / 04.19.12
4.2 DOOR OPERATION
To access the lower door latch, open the Valve Access Door as illustrated. Release
the top and bottom door latches, located at the right side of the door.
4.3 REAR EXIT
From inside the fi rebox, insert the 4" fl ue pipe / gasket assembly (provided) through the
rear of the fi rebox. Secure the gasket assembly to the rear and top of the appliance using
4 #8 x ¾ inch Hex Head Wildrill screws supplied.
Do not overtighten. The gasket needs only to be snug against the fi rebox.
Before attaching elbows to the collars on the back of the appliance, 1½" will need to be
trimmed off the 4" collar.
4.4 TOP VENT
A.
Remove the 7" diameter cap from the top of the appliance and re-secure
it over the 7" collar located at the rear of the appliance. Press
fi rmly on the
cap while securing to ensure an airtight seal. Do not damage the gasket.
B.
Remove the plate covering the 4" diameter fl ue opening (seen inside the
top of the 7" diameter collar) and discard. Try not to disturb the retaining
ring or the gasket beneath. Re-secure the ring and gasket using the screws
removed from the plate.
C.
From inside the fi rebox, insert the 4" fl ue pipe / gasket assembly through the
heat shield and out through the retaining ring. Secure the assembly to the
rear and top of the appliance using 4 #8 x ¾" Hex Head Wildrill screws supplied. Do not overtighten.
The gasket needs only to be snug against the
fi rebox.
!
WARNING
FAILURE TO INSTALL THE CAP WILL CAUSE THE APPLIANCE TO FUNCTION IMPROPERLY AND
CAN CAUSE INJURY OR PROPERTY DAMAGE.
!
WARNING
FAILURE TO INSTALL THE CAP WILL CAUSE THE APPLIANCE TO FUNCTION IMPROPERLY AND
CAN CAUSE INJURY OR PROPERTY DAMAGE.