Conti TWIN STAR 2 R-EV 2G, Техническая документация инструкция

Страница: 17 / 56

15
6.4.4 Cleaning function :
A cleaning cycle can be carried out independently on each group and at any time, otherwise
and after 500 coffee are produced on a group, the corresponding display will show:
Insert a blind filter with a cleaning tablet into one of the filter holders and install it on the group
where the message is shown.
To start the cleaning cycle and suppress the message, press during 2 sec the 5th push-button
(Continuous key) of the group where the message is shown.
The pump and the group solenoid valve are 2 sec ON, 1 sec OFF, repetition 15 times.
During the cleaning cycle the display will indicate:
When the 15 times rinsing cycle are finished, the display will indicate:
Remove the filter holders and evacuate the coffee ground which remind in the dummy filter.
Put the filter holder on the group again then press the 5th push-button (Continuous key).
The rinsing cycle start. The pump and the group solenoid valve are 2 sec ON, 1 sec OFF,
repetition 15 times. During the Rinsing cycle the display will indicate:
When the rinse cycle is finished, the display will return to the standard mode and the coffee
counter of the group will go back to zero.
Remarks:
-
The coffee counter: each push-button is worth 1 unit, the Continuous button has no value.
- The cleaning cycle can be activated before the message appears on the display.
- While a group is being cleaned, the others groups will work normally.
- All groups can be cleaned at the same time.
- The cycle can be stopped by pressing one of the five push-buttons of the group.
Please Rinse
Washing
in Progress
Rinse
Rinsing
in Progress